top of page
OKLA-AKL-IMG_0059.jpg

TONALITY ADS SYSTEM

High Performance Natural Clay Tiles
OKLA-AKL-IMG_0063.jpg

The Rear-ventilated
Ceramic Facade

High quality, frost resistance and durability have been inherent characteristics of TONALITY façade tiles for decades. These high-quality façade tiles distinguish themselves through their outstandingly high-quality raw materials combined with their unique colours, range of surface finishes, highly attractive joint designs and practical installation-friendly technology.

 

Ventilated rainscreen façade projects, whether new builds or refurbishments, when constructed from TONALITY façade tiles have proven themselves both to be highly reliable and to possess outstanding physical characteristics.

 

With its graffiti protection, non-combustibility and low maintenance requirements, TONALITY facades are highly recommended for multi-unit residential, public or commercial buildings at every height.

Overview
Amazing Features
& Benefits
Features & Benefits

Adaptive System (ADS)

The TONALITY façade system consists of façade tiles that are profiled on the reverse, which interlock with the vertical aluminium hanger profiles. The vertical joints between the tiles are backed by aluminium joint profiles.

 

Tonality offers two fastening systems, but we recommend the Tonality Adaptive System (ADS) due to its high flexibility for variable joint design, fixing locations and noise prevention.

 

The TONALITY ADS vertical profiles are available in system depths of 46mm, 56mm and 66mm.

Cavity depths equal system depth minus tile depth, for example 56mm system – 26mm tile = 30mm cavity.

ADS-02-ISO.png
ADS-03-IsoCloseup-02.png
ADS-04-2DExploded-04.png

Components

1 Tonality Facade Tiles

2 Tonality Adaptive Vertical profile metal

= system substructure

3 Tonality Adaptive joint profile metal

4 Tonality disassembly lock

5 Primary substructure aluminium

(common overseas installation)

NZ Alternative to timber framing

Adapive System ADS

ADS Joint Profiles

The ADS profiles allows for joint profiles with closed, subtle or open joint and even end profiles without joint. Whether you wish to work with a closed joint of 8 mm width or a nearly indiscernible 2 mm wide subtle one, the system holds the suitable solution for any design requirement. The closed joints can be realised in set back or flush-mounted versions as well.

TO-ClosedJointR-3D-Grey-03.png
TO-ClosedJointR-2D-Grey-03.png

Closed Joint Profile

Recessed

8mm

TO-ClosedJointF-3D-Grey-03.png
TO-ClosedJointF-2D-Grey-03.png

Closed Joint Profile

Flush

8mm

TO-FineJointR-3D-Grey-03.png
TO-FineJointR-2D-Grey-03.png

Fine Joint Profile

Recessed

2mm

TO-FineJointF-3D-Grey-03.png
TO-FineJointF-2D-Grey-03.png

Fine Joint Profile

Flush

2mm

TO-OpenJoint-3D-Grey-03.png
TO-OpenJoint-2D-Grey-03.png

Open Joint Profile

Flush

8mm

TO-EndProfile-3D-Grey-03.png
TO-EndProfile-2D-Grey-03.png

End Profile

for closure

(No disassembly

protection)

ADS Joint Profiles

Related Products